Contact Us

Ⅰ. How to adjust the date of quartz stainless steel watches?


Quartz stainless steel watches are smaller than mechanical watches, more convenient to carry, and more accurate than mechanical watches. Therefore, many people like quartz stainless steel watch very much, so how to adjust the date of quartz stainless steel watches?


1. Pull out the crown and let all the hands of the quartz stainless steel watch stop, and enter the "adjust time" state. At this point, set the time to six o'clock. (To avoid damaging the date module when adjusting the date week)


2. Push the crown back a buckle to "adjust the date and day" state. (At this point, the watch hands begin to turn normally)


3. Adjust the date and day of the week to the day before the date of the watch.


4. Pull out the crown again to the "adjust time" state where the hands stop walking and start adjusting the time so that the quartz stainless steel watch hands turn clockwise (do not turn counterclockwise, it will do great damage to the time module).


You should be gentle and adjust the time until the hands are close to midnight when you find the date and day jump to the next day (the day the watch is set). This jump may occur when the hour hand passes noon for the second time.


The date jump indicates that the hands of the quartz stainless steel watch are now starting to show this time of day in the morning of the day you are setting the watch. If you happen to be setting the clock in the morning, adjust the watch to the exact current time and ultimately push the crown back. The watch hands usually turn, and the watch adjustment is over.


If you are adjusting the watch in the afternoon, then continue changing the time so that the hour hand passes 12 o'clock again (at which point the date and day will not jump but will still show the day of the adjustment).


At this point, the watch will indicate the afternoon session of the day you are adjusting it. At that point, you continue to change the quartz stainless steel watch time to the current exact time, push the crown back entirely, the watch hands usually will turn, and the watch adjustment is complete.


Ⅱ. How to change the battery in a quartz stainless steel watch?


Quartz stainless steel watches are very convenient and fashionable watches, so many people like to wear them. But we all know that the power of quartz stainless steel watches comes from the battery inside the movement, so how to change the quartz stainless steel watches?


1. Use bamboo or plastic tweezers to take the battery. Remember to bring gloves when handling the barrage of ladies quartz stainless steel watches to prevent static electricity on human hands so as not to cause a short battery circuit.


2. The battery should be preserved in the right place. After taking out the watch battery, you should put the battery in the correct direction of the positive and negative poles.


3. Wipe the battery clean. Before installing a new battery, check the positive and negative contact points connected to the battery for dirt. If it is dirty, you can use alcohol or gasoline to wipe it clean.


4. Pay attention to the direction when installing the battery. When installing the battery, you should pay attention to the positive and negative direction of the ladies quartz stainless steel watch battery, and do not install the positive and negative poles backward.

Products